Nanded City is a township located in the southwest of Pune, India. Construction began in 2010 and continues to develop itself with newer housing societies. Sargam at Nanded City is a residential project developed by Nanded City Development and Construction at Nanded in Pune. The project consists of 2, 2.5, and 3 BHK apartments with 7 buildings of 31 floors each. It has 1736 units.
Aquamate Consultants Private Limited, incorporated on 26 October 2015, is a well-known MEP consultant firm from Pune that works on high-end residential and commercial projects. Mr. Anand Vijay Chiplunkar and Mr. Ketan Vijaykumar Dantale serve as directors at the firm and have established Aquamate as a go-to firm for specialty design services.
Plumbing regulations call for the water trap seal on sanitary fixtures to always be maintained. This is typically accomplished by introducing atmospheric air into the plumbing drainage system via a separate smaller vent pipe going through the roof. But there are limitations to venting with pipes in the conventional way which was a concern for the builder and the consultant for the 31-storey project.
The Builder was concerned about the loss of the Water Seal which leads to bad odour, unpleasant noise, and repeat maintenance. The sheer height of a building changes the physical forces applied to plumbing systems, rendering conventional designs unsuitable for high-rise projects. The developer and consultant were looking for a solution that can help replace the conventional system, a cost-effective and smart plumbing solution.
We proposed Active drainage Ventilation that eliminates the need for a separate vent pipe, allowing customers to save space, costs, and installation time and ensuring better system Performance.
Ashirvad Active Drainage Ventilation Products prevent the loss of water seals in traps, and hence bad odors. Maintaining optimal water seals across all traps at all levels in a multi-story building upholds the highest degree of health and sanitation for inhabitants. Ashirvad Team worked very closely with the Consultant and builder to understand the requirement of the project and provide value addition to the project with cost-effective solutions, design support, and quality products.
The following products have been used since 2019
– Studor P.A.P.A.
– Maxi -Vent with global connector
– Mini-Vent
– Ashirvad Flowguard Plus® CPVC
– Ashirvad uPVC Aqualife®
Back
