Advanced triple-layer piping with patented mounting brackets—designed to minimize sound and improve comfort in modern buildings.
Total products : 9
Total SKUs : 390+
IS 13592
IS 14735
The reducing door tee is a variation of the reducing tee which
Belongs to a family of cleanout accessories. IT is installed to provide
The Multi trap is a SWR fitting provided in the sunken floor
The Bend 45 is a uPVC SWR pipe fitting connecting drainage pipes
The Equal Single Y is a variation of the Equal Single Y
The Equal Y is a SWR pipe fitting that connects a branch
This Equal fitting is a variation of the Equal Tee with a
This Equal fitting is used to direct and divert drainage in the
This Equal fitting is a variation of the Equal Elbow with an
This Equal fitting helps divert the flow of drainage at an inclined
The coupler performs the task of connecting two plain-end drainage pipes in
The Single Y is a SWR pipe fitting that connects a branch
This uPVC SWR pipe fitting is used to direct and divert discharge
The Plain Bend Elbow is a connector /transition fitting that can be
The Bend 45 is a Silent Plus SWR pipe fitting connecting two
This Silent Plus SWR pipe fitting is a variation of the coupler
This Silent Plus SWR pipe fitting is used to direct and divert
The Blue Seal is a rubberized yellow ring that reinforces leak-proof joints.
Ashirvad pipe brackets absorb the vibrations from the pipe and reduce structural
This is an integral accessory of Door fittings. Cap can be opened
The Bend 45 is a UGD fitting connecting two drainage pipes or
The reducing Y with door is a variation of the reducing Y
This SWR pipe fitting is a variation of the tee with an
This SWR fitting is a variation of the Long Swept Bend with
This is a transition SWR pipe fitting used to facilitate discharge flow
This is a variation of the SWR fitting Long Swept Tee with
This SWR fitting is a variation of the Single ‘Y’ fitting with
This SWR pipe fitting has an accessible threaded door which is typically
The Single Y is a variation of the Single Y SWR pipe
The Single Tee is a SWR pipe fitting that connects a horizontal
The reducing Y is a uPVC SWR pipe fitting that connects two
Ashirvad Silent SWR pipes are manufactured with a 3-layer mineral-filled uPVC pipe
The specially engineered multi-layer uPVC construction absorbs sound and vibration, delivering quieter drainage in busy buildings.
Innovative acoustic brackets reduce vibration transfer to walls and structures, significantly lowering operational noise levels.
Blue Seal™ push-fit joints provide watertight sealing, quick installation, and dependable long-term performance.
Manufactured with fire-retardant and UV-stabilized materials, making the system suitable for demanding indoor and outdoor environments.
Choose push-fit (with pre-installed seal) or solvent-fit based on your layout.
Ensure pipe ends are free of dust and debris.
Push the pipe into the fitting until it reaches the stopper (for push-fit) or apply solvent cement and join (for solfit).
Ensure correct gradient for gravity drainage.
Use recommended supports, especially for vertical runs.
Conduct a water test to confirm leak-free installation.
Access our BIM resources or connect with our technical team to start planning your project.
A specially formulated multi-layer design reduces sound and vibration, ensuring quieter performance in high-occupancy environments.
Provides secure, leak-proof joints with simple installation and long-lasting reliability.
Licensed from GIRPI (Aliaxis Group), these brackets are engineered to absorb vibration and minimize structural noise transmission.
3 min read
If you are tackling a plumbing project at home, you may be curious about the pipes hiding behind your walls....
5 min read
Do you picture your ideal day starting with a satisfying soak in a powerful shower, uninterrupted by sputtering water pressure?...
4 min read
Water, a fundamental necessity for our daily routines encompassing drinking, bathing, washing, and cleaning, plays a pivotal role in our...
Estimate your Low Noise SWR pipes and fittings requirements easily using our intelligent plumbing calculators.
It incorporates a triple-layer pipe design along with patented acoustic brackets that significantly reduce noise from wastewater flow.
It is ideal for noise-sensitive spaces such as hospitals, hotels, premium residences, schools, and commercial buildings.
Yes. The system meets fire-resistance standards and is suitable for both interior and exterior installations.
For best results, it is recommended to use system-specific low-noise fittings and acoustic brackets designed for optimal compatibility.
The system is generally available in 75 mm, 110 mm, and 160 mm sizes to accommodate various building requirements.
No specialized tools are needed. Standard SWR tools can be used, but acoustic brackets must be installed according to the provided guidelines.