Leak-resistant, corrosion-proof, and easy-to-install SWR solutions—crafted for India’s residential and commercial plumbing needs.
Total products : 9
Total SKUs : 350+
IS 13592:2013 (Pipes)
IS 14735:1999 (Fittings)
Innovation Patent
This UGD pipe fitting features a threaded access door that allows easy
This Silent Plus SWR pipe fitting is a modified tee design featuring
This SWR pipe fitting connects two branch lines from the left as
The reducing Y with door is a variation of the reducing Y
The coupler performs the task of connecting two plain-end drainage pipes in
The 45 degree Bend is a uPVC SWR pipe fitting used to
This SWR fittings is used to reduce/expand the diameter in adjoining connections.
The Yellow Seal is a rubberized yellow ring that reinforces leak-proof joints
This SWR fitting prevents the undesirable reversal of the flow of water
The Pass Over Bend is a transition fitting that enables the ‘passing-over’
This SWR fitting is a variation of the Long Swept Bend with
This is a transition SWR pipe fitting used to facilitate discharge flow
This SWR pipe fitting is a variation of the triple socket. It
The Swept Tee Triple socket is a SWR pipe fitting connecting the
The Tee Triple Socket is a SWR pipe fitting that has sockets
This is a variation of the SWR fitting Long Swept Tee with
This SWR pipe fitting connects the horizontal branch line to the stack.
This is a variation of the Swept Tee Plain. The fitting features
This SWR pipe fitting connects the horizontal branch line to the vertical
This SWR fitting is a variation of a typical tee fitting with
This SWR pipe fitting is a variation of door elbow commonly used
This SWR fitting is a variation of the ‘door elbow’ fitting with
This SWR fitting is a variation of the Single ‘Y’ fitting with
This is a SWR pipe fitting that is used to connect the
The Double ‘Y’ with door is a variation of the Double Y
The Single Y is a variation of the Single Y SWR pipe
The Double Door Tee is a variation of the Double Tee SWR
The Double Tee is a SWR pipe fitting that connects two branch
The Single Tee is a SWR pipe fitting that connects a horizontal
The reducing Y is a uPVC SWR pipe fitting that connects two
The reducing door tee is a variation of the reducing tee which
The door bend is a specialized form of the plain bend elbow
The Plain Bend Elbow is a transition fitting used to connect Pushfit
This SWR fitting is an accessory for Nahani traps that are used
The Bend 45 is a uPVC SWR pipe fitting connecting drainage pipes
The Equal Single Y is a variation of the Equal Single Y
The Equal Y is a SWR pipe fitting that connects a branch
This Equal fitting is a variation of the Equal Tee with an
The Equal Reducer tee is a fitting that has a vertical pipe
This Equal fitting is a variation of the Equal Tee with a
This Equal fitting is used to direct and divert drainage in the
This Equal fitting is a variation of the Equal Elbow with an
The Plain Bend Elbow is a connector/ transition fitting that can be
This Equal fitting helps divert the flow of drainage at an inclined
This SWR fitting is used to connect plain pipes of varying diameters.
The reducer coupler is a unique SWR fitting that enables the smooth
This is a SWR pipe fitting that boasts of a greater wall
This uPVC SWR pipe fitting is used to direct and divert discharge
This uPVC SWR pipe fitting is a variation of the coupler which
Made from high quality, maintenance-free plastic, the SWR end cap is used
This is a common SWR fitting used in combination with Pushfit &
This is an integral accessory of Door fittings. Cap can be opened
This SWR pipe fitting is used to protect the vertical stack from
Pipe clips are used as a fixation accessory to fix pipes and
Used to increase the height of P-trap and Multi-traps with a provision
It is a type of reducing tee with a Pushfit socket on
This is a connector fitting. Used to connect IWC to the drainage
It is a rubber ring that goes with WC connector straight and
Branch saddle offers a user-friendly solution for connecting branch outlet connections during
The Multi trap is a SWR fitting provided in the sunken floor
The Gully Trap without Jali is a variation of the Gully Trap.
The Gully Trap with Jali is a specialized trap attached to the
This is a specialized type of Nahani Trap SWR fitting provided in
S-Trap is a common SWR fitting used in combination with Pushfit &
Ashirvad SWR Solfit piping systems includes an extensive range of Soil, Waste
Ashirvad SWR Pushfit piping systems includes an extensive range of Soil, Waste
UGD Solvent cement is used to join pipes and fittings of Solfit,
The Ringfit lubricant is a pipe-jointing compound that is used to join
Our Yellow Seal™ and Blue Seal™ jointing technologies deliver secure, watertight connections—whether push-fit or solvent-fit—offering complete peace of mind.
Manufactured from high-grade uPVC, Ashirvad SWR pipes resist rust, scaling, and biological deposits for clean and durable drainage systems.
Lightweight pipes paired with precision-engineered fittings ensure quicker installation—ideal for new constructions and renovation projects alike.
Produced using advanced collapsible core mould technology, the pipes feature uniform wall thickness, defined grooves, and high impact strength for extended service life.
Choose push-fit (with pre-installed seal) or solvent-fit based on your layout.
Ensure pipe ends are free of dust and debris.
Push the pipe into the fitting until it reaches the stopper (for push-fit) or apply solvent cement and join (for solfit)
Ensure correct gradient for gravity drainage.
Use recommended supports, especially for vertical runs.
Conduct a water test to confirm leak-free installation.
Browse our BIM resources or connect with our experts to start planning your project.
Fabricated using collapsible core moulds to ensure consistent wall thickness, accurate dimensions, and superior durability.
Co-moulded Yellow Seal™ rings provide secure, leak-proof joints—allowing quick installation, thermal flexibility, and easy realignment without adhesives.
3 min read
Vastu Shastra, an ancient Indian philosophy, offers architectural guidelines based on the interplay of energies within a space. This approach...
5 min read
Have you ever considered what keeps the water flowing smoothly in your home? The silent heroes behind the scenes are...
4 min read
Whether you buy a pre-built house or construct one yourself, you should know about all aspects like plumbing, flooring, and...
From efficient pipes to eco-friendly storage, Ashirvad has everything you need for plumbing in a house. From efficient pipes to eco-friendly storage, Ashirvad has everything you need for plumbing in a house. From efficient pipes to eco.
2 From efficient pipes to eco-friendly storage, Ashirvad has everything you need for plumbing in a house. From efficient pipes to eco-friendly storage, Ashirvad has everything you need for plumbing in a house. From efficient pipes to eco.
3 From efficient pipes to eco-friendly storage, Ashirvad has everything you need for plumbing in a house. From efficient pipes to eco-friendly storage, Ashirvad has everything you need for plumbing in a house. From efficient pipes to eco.
Calculate your SWR pipes and fittings requirements effortlessly using our smart plumbing tools.
SWR refers to Soil, Waste, and Rainwater systems, covering non-pressurized drainage applications in residential, commercial, and infrastructure projects.
Ashirvad provides two convenient options: 1) Pushfit with pre-installed Yellow/Blue Seal™ rings for quick, leak-proof assembly 2) Solfit using solvent cement for strong, permanent bonding
Yes. Ashirvad SWR pipes are UV-stabilized and corrosion-resistant, making them well-suited for external drainage systems.
Sizes range from 40 mm to 200 mm, accommodating everything from compact homes to large commercial facilities.
With correct installation and maintenance, Ashirvad SWR pipes can perform reliably for over 50 years.
The co-moulded Yellow Seal™ rubber ring ensures a 100% leak-proof connection without adhesives. It accommodates thermal movement and allows joints to be reopened for adjustments.
The lubricant enables smooth insertion of pipes and fittings, simplifying installation. It is not an adhesive but aids proper assembly.
No. Solfit joints require solvent cement for proper bonding; lubricant adhesives are not suitable.
No. Solvent cement is not advised for Pushfit systems, as it may damage the Yellow Seal™ and compromise joint performance.
Yes. All Ashirvad SWR pipes and fittings are manufactured without lead.
Multi-floor traps and deep-water seal P-traps typically provide a 50 mm water seal for effective odor prevention.
A Swept Tee enables smoother water flow from horizontal to vertical lines, reduces impact noise, improves airflow, and minimizes water curtain formation compared to a standard Tee.
Ashirvad SWR systems comply with IS 13592:2013 for pipes and IS 14735:1999 for fittings.
No. Site-made sockets may cause leakage and weak joints. Always use factory-supplied sockets or couplers available in sizes from 40 mm to 315 mm.
Ashirvad Warranty applicable only if the pipes, fittings, solvent cement or lubricant is from Ashirvad
Warranty coverage applies only when Ashirvad pipes, fittings, solvent cement, and lubricant are used together.
Yes. Water-based paints may be used if required. The pipes are UV-resistant by design.
Yes. Products such as the Single Stack Aerator and Active Drainage Ventilation System are available for complex and high-rise applications. Contact customer support for details.