Ashirvad Pipes Pvt. Ltd. also supplies Ashirvad marked bottom and top adaptors for fitment with Drop / Riser Pipes. Our threads are in 11 TPI. Bottom thread of the bottom adaptor & Top thread of the Top adaptor are 11 TPI. However for customization of these threads please specify with drawings.
TOP ADAPTORS / CONNECTORS
Top adaptors are available in MS Seamless / Cast iron / Stainless Steel and are used to connect the Riser / Drop top pipe with bend fitting.
BOTTOM ADAPTORS / CONNECTORS
Bottom adaptors are available in Cast iron / Stainless Steel and are used to connect the bottom pipe with the pump.
PUMP GUARD
A pump guard which can be used between the bottom pipe and bottom adaptors is recommended for areas with excessive pump vibration due to sand pumping, sub standard pumps, other local conditions. Photographs of pump guard is shown here below.
INNER AND OUTER JIGS
Inner & outer jig for extraction of pump from bore well incase of bore collapse, pump jamming due to boulders, small pieces of stones etc. The inner & outer jig have been designed by Ashirvad Pipes Pvt. Ltd., to help retrieve the pump out of the bore well in difficult conditions.
A lowering fixture has been developed by Ashirvad Pipes Pvt. Ltd., for lowering or extracting the Riser / Drop pipes from Borewell. The fixtures are from 1” to 5” size to be tightened on the coupler side.
|
